The maintenance of the car lamp housing(1)

Check car lights(car lamp housing)
It is an extremely rapid and simple work to check the burn out fault of automobile lamp bulbs. However, the overall and systematic maintenance of exterior lamps is not so simple. Timely maintenance of exterior lamps is very important for drivers, because it not only affects the driving comfort, but also directly related to the driving safety. Usually, before being reminded, it is difficult for car owners to realize that the headlights, tail lights, cornering lights or parking lights can no longer work normally. Incidentally, the work of replacing burned out bulbs is very simple, and the cost of DIY is lower than the charging standard for lighting system maintenance in the maintenance station.

More often, the failure of the lamp is not just a small problem such as bulb burning, socket corrosion or plug damage. Professional diagnostic technology is often needed to analyze the root cause of the failure. Even for those low-cost cars, the internal and external lamps are controlled by the host computer. For those luxury cars, only their headlights are controlled by three computers.

Understand the working principle of the device（car lamp housing)
If your car is equipped with DRLs, you must first understand the working principle of these devices. For example, some daytime running lights cannot be turned on before the engine is started; There are also some daytime running lights. If the parking brake has not been cancelled, even if the engine has been started, the daytime running lights still can not work normally. If the vehicle is equipped with a light controlled lamp, you might as well check the operation of the lamp from the weakest to the strongest state. Of course, do not ignore the check of the automatic shutdown timer. If the system is equipped with a timer, set it to the maximum delay.

Pay attention to the replacement of lamps(car lamp housing)
If the headlamp is damaged, it is usually replaced with similar lamps. Some cars are equipped with high intensity discharge headlamp hid, which generates high-density light source through high-voltage arc discharge generated by its pre designed electronic system. Note that ordinary quartz halogen bulbs cannot be used here. In addition, check whether the headlamp lens has cracks, because although the surface cracks will not affect the lighting performance of the headlamp, moisture will penetrate into the lamp along the cracks, which will inevitably reduce the service life of the bulb.

The calibration of the headlamp illumination direction shall also be included in the list of maintenance items, because in order to ensure the maximum safety of the driver, the headlamp must be able to provide good forward lighting for the driving vehicle.